Jetfire glider

Kód
4SH0030
Márka
Guillow
Elérhetőség
Ár:
109 Kč
incl. VAT

Full balsa kit glider with a span of 305 mm.

Full balsa glider with detachable wing and tail surfaces. You can assemble the model simply by sliding it into the milled cut-outs and grooves in the fuselage; For greater durability and durability of adjustment, parts of the model can be glued with acetone glue (Kanagom, L-510, UHU-Hart, etc.) or with a thin second glue.Kit contains: hull with load, die-cut and printed wing already formed into the upright, pre-cut tail and cabin.Construction tip: The tail and cab are delivered as pre-cut in a balsa board - DO NOT break out the parts! If some of the wood fibers are still "bound" to the cutting board, carefully separate the part with a sharp knife.Wingspan [mm]: 305 ; Lenght [mm]: 215 ; Weight [g]: 7 ; RC Control: None ; Building difficuilty: S0 ; Difficuilty of piloting: P0 ... több »

Full balsa glider with detachable wing and tail surfaces. You can assemble the model simply by sliding it into the milled cut-outs and grooves in the fuselage; For greater durability and durability of adjustment, parts of the model can be glued with acetone glue (Kanagom, L-510, UHU-Hart, etc.) or with a thin second glue.

Kit contains: hull with load, die-cut and printed wing already formed into the upright, pre-cut tail and cabin.

Construction tip:The tail and cab are delivered as pre-cut in a balsa board - DO NOT break out the parts! If some of the wood fibers are still "bound" to the cutting board, carefully separate the part with a sharp knife.

Wingspan [mm]: 305 ; Lenght [mm]: 215 ; Weight [g]: 7 ; RC Control: None ; Building difficuilty: S0 ; Difficuilty of piloting: P0

Wing span [mm]305
Length [mm]215
Weight [g]7
Controlled functionsnone
Build difficultyS0
Operating difficultyP0

Ke správnému fungování webových stránek a k analýzám návštěvnosti používáme soubory cookies. Používáním webu souhlasíte s jejich užitím. BERU NA VĚDOMÍ