DARA Glider Kit A1 (F1H) 1200mm

Kód
KAV8047
Márka
KAVAN
Elérhetőség
Ár:
949 Kč
incl. VAT

A builder's kit of an all-balsa F1H (A1) category free flight glider with a built-up wing and tail. An ideal introduction to the classic building and dope&tissue covering. CNC cut parts. Hand launch or hi starts with 50 m tow line.

A builder's kit of the all-balsa F1H (A1) category free flight glider with a tissue covered built-up wing and tail. An ideal introduction to the classic building and dope&tissue covering for everybody who has not forgotten that some of the most important aeroplanes in the history were made of wood. You know - Wright Flyer, Bleriot XI, deHavilland Mosquito... Your Dara makes a good hand launch glider; the adjustable side tow hook will allow hi-starts using 50 m tow line the F1H (A1) category calls for. Precise CNC-cut parts, full size plan and detailed instruction manual make the assembly very easy; only very basic modelling tools (a modelling knife, scissors, modelling pins, fine flat brush), glue (UHU-Hart, medium CA etc.) and adhesive & shrinking dope are required. Designed and manufactured in the Czech Republic. The kit contents: CNC-cut balsa parts of fuselage, wing and tail, hardwood sticks, sand paper, ballast, rubber band, ... több »

A builder's kit of the all-balsa F1H (A1) category free flight glider with a tissue covered built-up wing and tail. An ideal introduction to the classic building and dope&tissue covering for everybody who has not forgotten that some of the most important aeroplanes in the history were made of wood. You know - Wright Flyer, Bleriot XI, deHavilland Mosquito... Your Dara makes a good hand launch glider; the adjustable side tow hook will allow hi-starts using 50 m tow line the F1H (A1) category calls for.

Precise CNC-cut parts, full size plan and detailed instruction manual make the assembly very easy; only very basic modelling tools (a modelling knife, scissors, modelling pins, fine flat brush), glue (UHU-Hart, medium CA etc.) and adhesive & shrinking dope are required.

Designed and manufactured in the Czech Republic.

The kit contents: CNC-cut balsa parts of fuselage, wing and tail, hardwood sticks, sand paper, ballast, rubber band, adjustable side tow hook, white covering tissue, stickers, full size building plan and instruction manual.

Bulk package (10, 20...30 pcs) at reduced price for model clubs and organizations available on request.

Wing span [mm]1200
Length [mm]815
Weight (min. 220 g) [g]225
Controlled functionsnone
Build difficultyS1
Operating difficultyP0

Ke správnému fungování webových stránek a k analýzám návštěvnosti používáme soubory cookies. Používáním webu souhlasíte s jejich užitím. BERU NA VĚDOMÍ